Order Products : sales@su-jiao.com
Cosmic Epoxy EH51
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | a5CP7O_Cosmic-Epoxy-EH51.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic EH51 is an iron filled epoxy molding compound which is supplied in a granular form. FEATURES This material flows easily under low pressure and provides good moldability. APPLICATIONS The material is good for EMI / RFI shielding, and can be either compression or transfer molded to fabricate core rods and to encapsulate surface mount and axial leaded inductors. This single molded compound eliminates the labor intensive over-under molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 2.89 | g/cm³ | |
| Bulk Factor | 2.5 | ||
| Spiral Flow | 30.0 - 45.0 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (5°C) | 17 | wk | |
| Post Cure Time (160°C) | 2.0 - 4.0 | hr |
| Additional Information |
|---|
| Inductance Ls (µH) : 0.20 - 0.26Quality Factor : 3.8 - 4.8 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 130 - 180 | °C | |
| Injection Pressure | 0.345 - 5.52 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| METALCAP PPC371B73 | Polyram Ram-On Industries | PP Copolymer | METALCAP |
| SEETEC LLDPE UT404 | Lotte Chemical Corporation | LLDPE | SEETEC LLDPE |
| Vistamaxx™ 6102FL | ExxonMobil Chemical | PP Elastomer | Vistamaxx™ |
| LUBEMID B27 GF25 NATURAL | LUBEN PLAST srl | Nylon 6 | LUBEMID |
| Sylvin 60509 BLACK | Sylvin Technologies Incorporated | PVC+NBR | Sylvin |
