Order Products : sales@su-jiao.com
EMAC® SP2403
| Category: | EMA , Ethylene Methyl Acrylate Copolymer |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | EMAC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZvNNc4_EMAC-SP2403.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EMAC resins adhere to and are compatible with a wide range of materials including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVdC, unplasticized PVC and other polar polymers. For use as heat seal layer, adhesive layer, or modifier for cost/performance enhancement. They are soft, pliable and tough at ambient and freezing temperatures and exhibit excellent ESCR. These polymers exhibit high solids fillability and compatibility with a wide range of polymers. This facilitates their uses as bases for all-purpose concentrates for addition to a wide spectrum of polymers. They process like LDPE. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
| Methyl Acrylate Content | 24.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 34 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 8.00 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 670 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -73.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 44.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 75.0 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP ERTALON® 66 SA | Quadrant Engineering Plastic Products | Nylon 66 | Quadrant EPP |
| Sindustris ABS LRS911M | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| NYCOA Polyamide 5300 ST | Nycoa (Nylon Corporation of America) | Nylon 66 | NYCOA Polyamide |
| Grivory® HT1V-65H black 9205 | EMS-GRIVORY | Nylon 6I/6T | Grivory® |
| Techsil® EP25485 | Techsil Limited | Epoxy | Techsil® |
