Order Products : sales@su-jiao.com
Ultramid® HFX 37
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | BASF Corporation |
| Trademark: | Ultramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZqAq1C_Ultramid-HFX-37.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ultramid HFX 37 is a polyamide specialty extrusion resin combining high flexibility, excellent burst performance and outstanding chemical resistance. It offers high melt strength and enhanced heat stability. Applications Ultramid HFX 37 is recommended for tubing applications requiring an outstanding balance of flexibility, chemical and heat resistance and burst performance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 48.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break (23°C) | 200 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 750 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 100 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 220 | °C | ISO 3146 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Cylinder Zone 1 Temp. | 225 - 245 | °C | |
| Cylinder Zone 3 Temp. | 225 - 250 | °C | |
| Cylinder Zone 5 Temp. | 225 - 245 | °C | |
| Flange temperature | 230 - 245 | °C | |
| Head Temperature | 230 - 245 | °C | |
| Extruder Screw L/D Ratio | 20.1:1.0 to 24.0 to 1.0 | ||
| Extruder Screw Compression Ratio | 3.5:1.0 to 4.0:1.0 | ||
| Melt Temperature | 225 - 245 | °C | |
| Die Temperature | 230 - 245 | °C |
| Extrusion instructions |
|---|
| Screw Parameters Metering Section : 40% Transition Section : 3 to 4 flights Feed Section : balance of screw length |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reblend® SC5515UA NAT | SO.F.TER. SPA | PC+ABS | Reblend® |
| SEETEC EVA EF221 | LG Chem Ltd. | EVA | SEETEC EVA |
| Sindustris PBT SV1081 | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| Five Plus™ HPP20T | Noble Polymers | PP Homopolymer | Five Plus™ |
| Plavis® G40 | Comco Nylon GmbH | PI, TP | Plavis® |
