Order Products : sales@su-jiao.com
Optix® CA-8125
| Category: | Acrylic (PMMA) , Polymethyl Methacrylate Acrylic |
| Manufacturer: | Plaskolite, Inc. |
| Trademark: | Optix® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZnLFdG_OptixCA8125.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Optix®CA-8125 is a polymethyl methacrylate-acrylic material,. This product is available in North America or Europe,. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) | 1.6 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 - 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2960 | MPa | ASTM D638 |
| Tensile Strength | 67.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 21 | J/m | ASTM D256 |
| Dart Drop Impact 1(3.18 mm) | 1.13 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 90.6 | °C | ASTM D648 |
| Vicat Softening Temperature | 110 | °C | ASTM D1525 |
| CLTE - Flow (-30 to 30°C) | 8.0E-5 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Geometry GB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S HS 105 M NAT | Radici Plastics | Nylon 6 | Radilon® |
| SCHULAMID® 6 HV 11 | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| Elastollan® C95A10 | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyester | Elastollan® |
| Grilamid® TR XE 4139 black 9231 | EMS-GRIVORY | Nylon, Unspecified | Grilamid® |
| Keliren® CPE235C | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
