Order Products : sales@su-jiao.com
AXELERON™ GP 6314 BK CPD
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | AXELERON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Zn0rmu_AXELERON-GP-6314-BK-CPD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AXELERON™ GP 6314 BK CPD is a linear low density based polyethylene jacket compound ("CPD"). This compound provides a good balance of processability, toughness, stress-cracking resistance, abrasion resistance, and weather resistance. AXELERON™ GP 6314 BK CPD is designed for use as a general purpose jacket for telecommunication cables. Main Characteristics:
|
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.932 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, F0) | > 1000 | hr | ASTM D1693 |
| Carbon Black Content | 2.6 | % | ASTM D1603 |
| Absorption Coefficient - (kAB/m) | > 400 | ASTM D3349 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile strength retention- after 48 hrs (100°C) | > 85 | % | ASTM D638 |
| Elongation retention rate- after 48 hrs (100°C) | > 90 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (200°C) | > 30 | min | ASTM D3895 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 16.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.50 | ASTM D1531 | |
| Dissipation Factor (1 MHz) | 3.0E-4 | ASTM D1531 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 115 - 140 | °C |
| Extrusion instructions |
|---|
| AXELERON™ GP 6314 BK CPD Jacket Compound can be processed in a wide range of extrusion equipment using flat profiles of 265 - 320°F (130 - 160°C). Hopper drying at 175°F (80°C) to remove moisture is recommended. However, specific recommendations for processing conditions can be determined only when the application and type of processing equipment are known. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2500 | RTP Company | PC+ABS | RTP |
| RTP 2385 A | RTP Company | PUR, Unspecified | RTP |
| Ultramid® B3GM35 Q611 | BASF Corporation | Nylon 6 | Ultramid® |
| KumhoSunny PET HEG3620NH | Shanghai KumhoSunny Plastics Co., Ltd. | PET | KumhoSunny PET |
| AKROLEN® PP GFM 25/15 black 950088 (1415) | AKRO-PLASTIC GmbH | PP, Unspecified | AKROLEN® |
