Order Products : sales@su-jiao.com
Formolene® HF3728
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZmoAKo_Formolene-HF3728.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® HF3728 is a medium density resin that provides an excellent overall balance of tensile, impact, and tear properties in thin film. Processing performance is excellent on high stalk lines. Formolene® HF3728 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.30 | g/10 min | |
| 190°C/21.6 kg 1 | 20 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength 2 | ASTM D882 | ||
| MD : Yield, 25 µm, Blown Film | 21.4 | MPa | |
| TD : Yield, 25 µm, Blown Film | 21.4 | MPa | |
| MD : Break, 25 µm, Blown Film | 42.1 | MPa | |
| TD : Break, 25 µm, Blown Film | 42.1 | MPa | |
| Tensile Elongation 3 | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 500 | % | |
| TD : Break, 25 µm, Blown Film | 600 | % | |
| Dart Drop Impact (25 µm, Blown Film) | 130 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, Blown Film | 50 | g | |
| TD : 25 µm, Blown Film | 500 | g |
| Note Message | |
|---|---|
| 1 . | HLMI |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PC PC1800R resin | SABIC Innovative Plastics Asia Pacific | PC | SABIC® PC |
| Ablebond 933-1 | Henkel Ablestik | Epoxy | Ablebond |
| Ad-Tech Epoxy EL-318-1 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| LEXAN™ 172L resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
| Sinvicomp DBS3510E | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | SINVICOMP |
