Order Products : sales@su-jiao.com
Ravago Compounds PP-6224
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Ravago Manufacturing Americas, LLC |
| Trademark: | Ravago Compounds |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZlcIHV_Ravago-Compounds-PP-6224.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP-6224 is a 40% Calcium Carbonate reinforced impact copolymer polypropylene. This product is specifically designed for injection-molded applications. PP-6224 offers a good combination of processability and physical properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 45 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 13.8 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (23°C) | 1930 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 64 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 - 93.3 | °C | |
| Drying Time | 0.0 - 8.0 | hr | |
| Rear Temperature | 193 - 238 | °C | |
| Middle Temperature | 193 - 238 | °C | |
| Front Temperature | 193 - 238 | °C | |
| Nozzle Temperature | 193 - 238 | °C | |
| Mold Temperature | 26.7 - 60.0 | °C | |
| Back Pressure | 0.00 - 0.689 | MPa | |
| Screw Speed | 50 - 150 | rpm |
| Injection instructions |
|---|
| Hot Runner Temperature (if applicable): 420 to 450°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Anjatech® 250-E/GF15 | Almaak International GmbH | Nylon 6 | Anjatech® |
| Aquivion® P98-SO2F | Solvay Specialty Polymers | PFSF | Aquivion® |
| Hostacom TRC 352NA | LyondellBasell Industries | Polyolefin, Unspecified | Hostacom |
| Kepamid® 2333GB | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| ALTECH® ABS FC 1000/106 BK1280-05 | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
