Order Products : sales@su-jiao.com

POYO Putty® 40

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	POYO Putty®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZixAVY_POYO-Putty-40.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PoYo® Putty 40 is a two-component mold making silicones (tin catalyst) that can be mixed and applied "on site" - directly to almost any model. PoYo® Putty will hold any vertical surface and capture even the finest detail - perfect for making strong rubber molds that can be used within minutes. Use Less - Do More: Because PoYo® is applied as a thin layer, less material is used, saving you money. Molds are also lightweight, making them easier to handle. Pot life and cure time can be adjusted (faster or slower) by varying the amount of Part B catalyst. User Friendly - PoYo® Putty can be measured and mixed by volume (no scale necessary). It will stick to itself and other silicone rubbers, giving the user many application options or for using as a silicone rubber repair material. PoYo® Putty has been used to make molds of valuable antiques and archeological models and can be used to make fast molds of sculpture, prototypes, candles, picture frames, coins, etc. You can cast wax, gypsum and a variety of resins into PoYo® Putty molds.

Message

PoYo® Putty 40 is a two-component mold making silicones (tin catalyst) that can be mixed and applied "on site" - directly to almost any model. PoYo® Putty will hold any vertical surface and capture even the finest detail - perfect for making strong rubber molds that can be used within minutes. Use Less - Do More: Because PoYo® is applied as a thin layer, less material is used, saving you money. Molds are also lightweight, making them easier to handle.

Pot life and cure time can be adjusted (faster or slower) by varying the amount of Part B catalyst. User Friendly - PoYo® Putty can be measured and mixed by volume (no scale necessary). It will stick to itself and other silicone rubbers, giving the user many application options or for using as a silicone rubber repair material.

PoYo® Putty has been used to make molds of valuable antiques and archeological models and can be used to make fast molds of sculpture, prototypes, candles, picture frames, coins, etc. You can cast wax, gypsum and a variety of resins into PoYo® Putty molds.

General Information
Features	Good Strength
Uses	Modeling Material
Appearance	Pink
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.30	g/cm³	ASTM D1475
Specific Volume	0.770	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	100A:6B by weight 20A:1B by volume
Operating Temperature	-54 to 204	°C

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	0.30	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	40		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	3.10	MPa	ASTM D412
Tensile Elongation (Break)	250	%	ASTM D412
Tear Strength ¹	14.9	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Pot Life (23°C)	3.0 to 5.0	min	ASTM D2471
Demold Time (23°C)	30	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Tenac™ 4012	Asahi Kasei Chemicals Corporation	Acetal (POM) Homopolymer	Tenac™
Star L POM D36	Eurostar Engineering Plastics	Acetal (POM) Copolymer	Star L
XANTAR® 18 SR FD	Mitsubishi Engineering-Plastics Corp	PC	XANTAR®
Hylac® GP74G10	Ravago Manufacturing Americas, LLC	ABS	Hylac®
LEXAN™ LUX2010T resin	SABIC Innovative Plastics	PC	LEXAN™