Order Products : sales@su-jiao.com

Exelene® HDPE 8000UV

Category:	HDPE , High Density Polyethylene
Manufacturer:	Montachem International, Inc.
Trademark:	Exelene® HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZgYHG6_Exelene-HDPE-8000UV.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Plastic beer, soda or juice boxes

Fruit and vegetable baskets

Characteristics:

The Exelene resin HDPE 8000UV meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Additive	Antioxidant UV Stabilizer
Features	Antioxidant Food Contact Acceptable Good UV Resistance High Density Homopolymer Narrow Molecular Weight Distribution
Uses	Food Containers Food Service Applications Fruit Juice Bottles Non-specific Food Applications
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.959	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (1.90 mm, F50)	3.00	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 1 sec, 23°C)	70		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - Tangent ¹(3.20 mm)	1210	MPa	ASTM D638
Tensile Strength ²(Yield)	31.0	MPa	ASTM D638
Tensile Elongation ³(Break)	> 600	%	ASTM D638

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (3.20 mm)	53	J/m	ASTM D256A
Tensile Impact Strength	168	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ⁴(0.45 MPa, Unannealed)	87.0	°C	ASTM D648
Brittleness Temperature ⁵	< -75.0	°C	ASTM D746A
Melting Temperature	133	°C	DSC

Note Message
1 .	13 mm/min
2 .	Type IV, 50 mm/min
3 .	Type IV, 50 mm/min
4 .	2°C/min
5 .	F50; 25 lbf*in

Resin Grade	Manufacturer	Category	Trademark
Favorite A100	Favorite Plastics	PE, Unspecified	Favorite
ESTACARB PC 0820GF V0	Cossa Polimeri S.r.l.	PC	ESTACARB
SEQUEL® E3400 UV NAT	LyondellBasell Industries	TPO (POE)	SEQUEL®
Sylvin 8200-50 Clear	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
CYCOLAC™ MG38 resin	SABIC Innovative Plastics	ABS	CYCOLAC™