Order Products : sales@su-jiao.com
Microthene® G MN70100
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Microthene® G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZgUBmB_Microthene-G-MN70100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Microthene G polyolefin powders are ground, irregularly-shaped particles for use in a broad range of specialty applications. Microthene G powders combine the unique properties of a polyolefin resin with a small ground particle size. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.912 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Average Particle Size | 35 | mesh | |
| Particle Shape | Irregular |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 51 | ||
| Shore D, 15 sec | 44 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 7.70 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Flexural Modulus | 186 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -22.7 | °C | ASTM D746 |
| Vicat Softening Temperature | 75.6 | °C | ASTM D1525 |
| Peak Melting Temperature | 101 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 4MID® 9A22150 FRR1 | 4Plas | Nylon 66 | 4MID® |
| OCTAL PET GS 05 | OCTAL Holding & Co. | PET | OCTAL PET |
| Grilamid® L 16 LM | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Hy-Vin® VT575/2 | INEOS Compounds | PVC, Flexible | Hy-Vin® |
| VALOX™ 357U resin | SABIC Innovative Plastics | PC+PBT | VALOX™ |
