Order Products : sales@su-jiao.com

NuSil SFM5-2350

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Zg30qs_NuSil-SFM5-2350.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone Foam Comment: Flame Resistant, 25 lb/ft³ (0.400 g/cm³)

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Silicone Foam

Comment: Flame Resistant, 25 lb/ft³ (0.400 g/cm³)

General Information
Features	Electrically Conductive Flame Retardant Fuel Resistant
Uses	Aircraft Applications Electrical/Electronic Applications Foam

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Grey
Density	0.349	g/cm³
Viscosity
-- ¹	45	Pa·s
-- ²	55	Pa·s
Curing Time (100°C)	0.75	hr
Pot Life	22	min

Cured Properties	Nominal Value	Unit
Electric Strength	7.5	kV/mm

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Tisblend® PC-ABS UNR	Tisan	PC+ABS	Tisblend®
Ultramid® B3ZG4	BASF Corporation	Nylon 6	Ultramid®
apilon 52® A7505	API SpA	TPU-Polyester	apilon 52®
FORMULA P COMP 3220 M1	Putsch Kunststoffe GmbH	PP Copolymer	FORMULA P
GAPEKK™ 3400P	Gharda Chemicals Ltd.	PEKK	GAPEKK™