Order Products : sales@su-jiao.com
VECTOR® 2518PC
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | TSRC Corporation |
| Trademark: | VECTOR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZexlGg_VECTOR-2518PC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
VECTOR 2518PC styrenic block copolymer is a linear triblock copolymer with a narrow molecular weight distribution. It is well-suited for use as an impact/toughness modifier in blends with styrenics and in engineering plastics. It is formulated with the antioxidant tris(nonylphenyl) phosphite (TNPP).
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Apparent Density | 0.34 | g/cm³ | ASTM D1895 |
| Melt Mass-Flow Rate (MFR) (200°C/10.0 kg) | 5.0 | g/10 min | ASTM D1238 |
| Bound Styrene | 31.0 | % | |
| Ash Content | 5.0 | wt% | |
| Solution Viscosity - 25 wt% in Toluene 25°C (25°C) | 3.9 | Pa·s |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Diblock Content | < 1.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 1 sec, Compression Molded) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 4.20 | MPa | Internal Method |
| Tensile Strength 2(Break) | 33.0 | MPa | Internal Method |
| Tensile Elongation 3(Break) | 700 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| 2 . | Compression Molded |
| 3 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 126211 Z | RTP Company | PLA | RTP |
| RTP 905 TFE 15 | RTP Company | PSU | RTP |
| Moplen HF461Y | LyondellBasell Industries | PP Homopolymer | Moplen |
| ESTASTIR HI 0412 | Cossa Polimeri S.r.l. | PS (HIPS) | ESTASTIR |
| EPAMOULD 665A56 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
