Order Products : sales@su-jiao.com
Rotec® ABS 1501
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | ROMIRA GmbH |
| Trademark: | Rotec® ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZddVNM_Rotec-ABS-1501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Rotec®ABS 1501 is an acrylonitrile butadiene styrene (ABS) material,. This product is available in Europe,. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 30 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.30 - 0.60 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.30 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 50.0 | MPa | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 6.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 35 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 104 | °C | ISO 306/B50 |
| Additional Information |
|---|
| Most tests were performed under DIN test standards.Density, DIN 53479, 23°C, 50% RH: 1.06 g/mlHDT, DIN 53461: 91 °CCharpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Natural: 6 kJ/m²Charpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Color: 5 kJ/m²Charpy Unnotched Impact Strength, ISO 179, 23°C, Type 1, Edgewise, 80x10x4, Color/Natural: 35 kJ/m² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanoblend™ MB 1201 | PolyOne Corporation | PP Impact Copolymer | Nanoblend™ |
| Next Nylon 6 Prime Series NG50-01NC | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| 3M™ Dyneon™ TFM™ Modified PTFE TFM 2070Z | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE |
| Estane® 2103-84AEN TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| HiFill® PPS/F GF10 | Techmer Engineered Solutions | PPS | HiFill® |
