Order Products : sales@su-jiao.com
RTP 399 X 141380 A
| Category: | PC , Polycarbonate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZcKX2P_RTP399X141380A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Permanently Static Dissipative - ESD Protection - PTFE Lubricated - Preliminary Datasheet |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.60 - 0.90 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay 1 | sec | FTMS 101C 4046.1 | |
| Surface Resistivity | < 1.0E+9 | ohms | ESD STM11.11 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Dew Point | -29 | °C | |
| Processing (Melt) Temp | 227 - 249 | °C | |
| Mold Temperature | 60 - 93 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Do not exceed 520 °F (270 °C) melt temperature.Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | MIL-PRF-81705D, 5kV to 50 V, 12% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (ABS) LC 145 | A. Schulman Europe | ABS | POLYMAN® |
| SUSTAMID 6G LL | Röchling Sustaplast SE & Co. KG | Nylon 6 | SUSTAMID |
| Gallonprene® GP100-7502 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| K-vinyl FRLS 98 | Technovinyl Polymers India Ltd. | PVC, Flexible | K-vinyl |
| Paracril® BJLT M60 | INSA | NBR | Paracril® |
