Order Products : sales@su-jiao.com
ICORENE® 9104 GW1 Natural 0000
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZZafaM_ICORENE-9104-GW1-Natural-0000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 9104 GW1 NATURAL 0000 is a linear low density polyethylene specifically developed for use in complex rotational moulding applications. This grade has a good balance of properties such as toughness, easy flow, stiffness and a glow wire (GW) flammability index of 750°C for 3mm thickness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | > 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 800 | % | ASTM D638 |
| Flexural Modulus | 700 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance (-20°C) | 190 | J/cm | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 123 | °C | ISO 11357 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index (3.00 mm) | 750 | °C | IEC 60695-2-12 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex WR-9120 | SAMSUNG SDI CO., LTD. | ASA | Starex |
| Mytex® AX05T | Mytex Polymers | PP, Unspecified | Mytex® |
| Dryflex® SE 45A001 | ELASTO | TPE | Dryflex® |
| PENTAMID AB S GV60 H natural | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
| POCAN® T 7391 000000 | LANXESS GmbH | PBT+PET | POCAN® |
