Order Products : sales@su-jiao.com
Magnobond 3360
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Magnolia Plastics, Inc. |
| Trademark: | Magnobond |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZVEY9V_Magnobond-3360.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Magnobond 3360 is an Epoxy; Epoxide (Epoxy) product. It can be processed by encapsulating or potting and is available in North America. Typical application: Electrical/Electronic Applications. Primary characteristic: low viscosity. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.27 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (25°C) | 3.79 | MPa | ASTM D638 |
| Tensile Elongation (Break, 25°C) | 93 | % | ASTM D638 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.6E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 4.11 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.020 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 86, Mix Ratio by Volume: 1.0 | ||
| Resin | Mix Ratio by Weight: 100, Mix Ratio by Volume: 1.0 | ||
| Thermoset Mix Viscosity (25°C) | 1700 | cP | ASTM D2393 |
| Demold Time (85°C) | 90 to 120 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Techsil IS803 | Techsil Limited | Silicone | Techsil |
| Cheng Yu ML1230 | Cheng Yu Plastic Company Limited | PC | Cheng Yu |
| Plaslube® ABS TL2 | Techmer Engineered Solutions | ABS | Plaslube® |
| 3M™ Dyneon™ PTFE Compound TF 3406 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| LNP™ LUBRICOMP™ RFP36 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
