Order Products : sales@su-jiao.com
Royalite R922
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Spartech Plastics |
| Trademark: | Royalite |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZTaaqc_Royalite-R922.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ROYALITE® R922 thermoplastic sheet is a rigid, fire-rated, polycarbonate/ABS material that meets Federal Aviation requirements for flammability as well as Airbus and Boeing toxicity requirements. This sheet exhibits excellent tensile strength, flexural strength and a very high heat deflection temperature for a flame retardant material. Royalite® R922 is ideal for requirements calling for FAR 25.853a 60 second vertical burn and/or FAR 25.853b 12 second vertical burn, low toxicity, and high strength. Each generation of resin developed by ROYALITE® for the aircraft industry brings increased performance for the designer and those responsible for specifying interior materials. APPLICATIONS: The unique formulation of Royalite® R922 provides an increased strength-to-weight ratio over other FR materials, allowing for part weight reduction, and increased heat deflection for a high performance industry. Royalite® R922 is excellent for plastic components located in lavatories and galleys along with high-wear scuff barriers in and around service entry areas. Reliability in other high wear areas such as tray tables and armrest trim are also ideal matches for Royalite® R922 sheet. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792, ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (grade r, 31.8mm) | 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| Yield, 31.8mm | 54.1 | MPa | ISO 527-2 |
| 31.8 mm | 54.1 | MPa | ASTM D638 |
| Flexural Modulus | 2410 | MPa | ASTM D790, ISO 178 |
| Flexural Strength (31.8 mm) | 91.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 31.8 mm) | 480 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, annealed, 31.8mm | 120 | °C | ASTM D648 |
| 1.8 MPa, annealed | 120 | °C | ISO 75-2/A |
| Additional Information |
|---|
| FAR/JAR 60s Vertical Burn, FAR/JAR Appendix F, Part I, 0.047in: PassesBoeing Toxicity Requirements, BSS 7239: PassSpecific Gravity, ASTM D792: 1.19 to 1.24 g/cm³Stock Temperature: 360 to 430 °FDrying Time: 4 hrFAR/JAR 12s Vertical Burn, FAR/JAR Appendix F, Part I, 0.047in: PassesDrying Temp: 220 °F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONYL 4002G0 | POLYROCKS CHEMICAL CO., LTD | Nylon 66 | PONYL |
| Bio-Flex® F 6510 | FKuR Kunststoff GmbH | Biodeg Polymers | Bio-Flex® |
| Colorite CS Series CS7533SC | Colorite Polymers | PVC, Flexible | Colorite CS Series |
| Geon™ Vinyl Fittings 87431 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Fittings |
| NHU-PPS 21310C/F | Zhejiang NHU Comp. Ltd. | PPS | NHU-PPS |
