Order Products : sales@su-jiao.com

Silopren® Electro 242-2

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Silopren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZSdaAB_Silopren-Electro-242-2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Silopren Electro 242-2 TP 3750 is a two-component liquid silicone rubber for injection moulding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulators

Key Features and Benefits
Vulcanisates consisting of Silopren Electro 242-2 TP 3750 are distinguished by the following properties:

outstanding ageing behaviour and weather resistance

fast hydrophobicity transfer and hydrophobicity recovery

rapid vulcanisation

excellent dielectric behaviour over a wide range of temperatures

very good tracking and arc resistance

very good flowability

high stability and flexibility at low temperatures

excellent stability to ozone and ultraviolet light

not readily combustible, does not melt or drip

easy pigmentable with LSR Colour Pastes

Potential Applications
Because of the outstanding properties Silopren Electro 242-2 TP 3750 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

General Information
Features	Arc Resistant Fast Cure Good Colorability Good Stability Good UV Resistance Good Weather Resistance High Flow Low Temperature Flexibility Ozone Resistant Tracking Resistant
Uses	Connectors Electrical/Electronic Applications Fittings Insulation Plugs
Forms	Liquid
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.08	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	36		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	7.50	MPa	DIN 53504
Tensile Elongation (Break)	720	%	DIN 53504
Tear Strength ¹	27.0	kN/m	ASTM D624

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	5.0E+15	ohms·cm	DIN 53482
Electric Strength	25	kV/mm	DIN 53481
Dielectric Constant (50 Hz)	2.70		DIN 53483
Dissipation Factor (50 Hz)	1.0E-3		DIN 53483
Arc Resistance	> 300	sec	DIN VDE 0441

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit	Test Method
Vulcanization (175°C)	10.0	min

Uncured Properties	Nominal Value	Unit	Test Method
Color
-- ²	Colorless
-- ³	Colorless
Viscosity			DIN 53018
20°C ⁴	120	Pa·s
20°C ⁵	130	Pa·s
Pot Life (20°C)	4300	min

Note Message
1 .	Die B
2 .	Part B
3 .	Part A
4 .	Part B
5 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8235-90FU Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
TAROMID B 280 G2 X2	Taro Plast S.p.A.	Nylon 6	TAROMID B
Evoprene™ COGEE 638	AlphaGary	SEBS	Evoprene™ COGEE
Petrothene® GA635962	LyondellBasell Industries	LLDPE	Petrothene®
Hylex® P1032L1	Entec Polymers	PC	Hylex®