Order Products : sales@su-jiao.com

For-Tec E OC6OAN (Series: AD/PAX/CR)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	For-Tec E
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZSHr6B_ForTecEOC6OANSeriesADPAXCR.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The AD/PAX/CR Series is your material solution for two-component-seals in electronic applications and soft-touch grips and handles of machine tools. The material provides an excellent resistance to skin oils, suncream, olive oil and acetone, accompanied by outstanding adhesion properties to semi-aromatic polyamids and polyarylamids such as PA 12, PA 6 und PA 6.6. The series is available in natural and black colors.

Typical applications

Attenuators for electronic housings

Connectors

Handles (Powertool)

Seals

Seals for computer and laptopscreens

Seals for housings

Material advantages

Easy coloring (compounds in natural colors)

Excellent adhesion to semi-aromatic Polyamides (PAX), Polyarylamids (PARA), Polyamides like PA 12, PA 6 and PA 6.6

Excellent mechanical properties

Resistance against skin oils, sunscreens, olive oil and acetone

UL 94 HB listed

General Information
Features	Good coloring Good adhesion Oil resistance
Uses	Handle Electrical/Electronic Applications Electrical housing Power/other tools Connector Seals Soft handle
Appearance	Natural color
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.13	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	60		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Break)	5.50	MPa	ISO 37
Tensile Elongation ²(Break)	850	%	ISO 37
Tear Strength ³	24	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	24	%	ISO 815
70°C, 24 hr	56	%	ISO 815
120°C, 24 hr	73	%	ISO 815

Additional Information	Nominal Value	Unit	Test Method
Adhesion to PARA	6.0	kN/m	Renault D41/1916
Adhesion to PAX	20.0	kN/m	Renault D41/1916

Injection	Nominal Value	Unit
Drying Temperature	60 - 80	°C
Drying Time	2.0 - 4.0	hr
Rear Temperature	180	°C
Middle Temperature	210	°C
Front Temperature	240	°C
Mold Temperature	60 - 80	°C
Injection Pressure	20.0 - 100	MPa
Back Pressure	2.00 - 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method B, right-angle specimen (cut)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Mirakutoran® TPU E198	Japan Mirakutoran Inc.	TPU Alloy	Mirakutoran® TPU
SILVER® SA-3154	Guangdong Silver Age Sci & Tech. Co., Ltd	TPE	SILVER®
Valtec HS013	INDELPRO, S.A. de C.V.	PP Homopolymer	Valtec
InSphere® 0513F	Synthos S.A.	PS (EPS)	InSphere®
Iupilon® EHR3200	Mitsubishi Engineering-Plastics Corp	PC	Iupilon®