Order Products : sales@su-jiao.com

Shin-Etsu Elastomer SV-14000U

Category:	Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer:	Shin-Etsu Silicones of America
Trademark:	Shin-Etsu Elastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZSAaNi_Shin-Etsu-Elastomer-SV-14000U.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SV-14000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering. This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with filler. Typical Applications Roll covers. Diaphragms.

Message

SV-14000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.

This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with filler.

Typical Applications

Roll covers.

Diaphragms.

General Information
Features	Workability, good General
Uses	Diaphragm General
Processing Method	Extrusion Calendering Injection molding

Physical	Nominal Value	Unit
Specific Gravity	1.09	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness	40

Elastomers	Nominal Value	Unit
Tensile Stress (100% Strain)	1.06	MPa
Tensile Strength	5.12	MPa
Tensile Elongation (Break)	360	%
Tear Strength ¹	10.7	kN/m
Compression Set (177°C, 22 hr)	25	%

Additional Information	Nominal Value	Unit
Cure Agent	DCBP
Press / Post Cure: Press

Uncured Properties	Nominal Value	Unit
Curing Time	0.17	hr

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
VITAMIDE® BY14NT6705	Jackdaw Polymers	Nylon 6	VITAMIDE®
EverGlide® MB250	Polymer Dynamix	PE, Unspecified	EverGlide®
LONGLITE® PMC T375J	CCP Group	Phenolic	LONGLITE® PMC
PLUSTEK PB320G6	Polyram Ram-On Industries	Nylon 6	PLUSTEK
Sylvin 9077-75 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin