Order Products : sales@su-jiao.com
APEX® RM 8220
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | APEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZRgooL_APEX-RM-8220.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| APEX® RM 8220 is a Rigid Polyvinyl Chloride material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(Compression Molded) | 2280 | MPa | ASTM D638 |
| Tensile Strength 2(Break, Compression Molded) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 2340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Compression Molded) | 1100 | J/m | ASTM D256 |
| Drop Impact Resistance 3(23°C) | 57.8 | J/cm | ASTM D4226 |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | 5.1 mm/min |
| 3 . | Procedure A, TUP |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinblend® A783 | Shinkong Synthetic Fiber Corp. | PC+ABS | Shinblend® |
| Sup-tech B104F | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon, Unspecified | Sup-tech |
| TECHLEN GT217 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| Evoprene™ 068 | AlphaGary | SBS | Evoprene™ |
| Plaskon 7115 | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
