Order Products : sales@su-jiao.com
En Chuan 6120TA-ISO
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZRgmov_En-Chuan-6120TA-ISO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This is a ISOphthalic type resin. It contains accelerator and thixotropy. 6120TA-ISO is designed for special products that require high resistance in chemical, weathering, and heat distortion. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 42 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus 2 | 8730 | MPa | ASTM D790 |
| Flexural Strength 3 | 227 | MPa | ASTM D790 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Thixotropic Index (25°C) | 1.50 - 2.50 | ||
| Red Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.40 - 0.60 | Pa·s | |
| Gel Time (25°C) | 8.0 - 15 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus 4 | 8630 | MPa | |
| Tensile Strength 5 | 128 | MPa |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 , Unfilled |
| 2 . | Filled |
| 3 . | Filled |
| 4 . | Filled |
| 5 . | Filled |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® A4H | BASF Corporation | Nylon 66 | Ultramid® |
| ColorFast® FRPS100 | LTL Color Compounders, Inc. | PS (HIPS) | ColorFast® |
| Dryflex® AM 75A203B | ELASTO | SEBS | Dryflex® |
| TOTAL Polyethylene Lumicene® M 1835 (Artificial Grass) | TOTAL Refining & Chemicals | mLLDPE | TOTAL Polyethylene |
| Styropek® P 240AH | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
