Order Products : sales@su-jiao.com

Lushan EV1050G2

Category:	EVA , Ethylene Vinyl Acetate Copolymer
Manufacturer:	Guangzhou Lushan New Materials Co., Ltd
Trademark:	Lushan
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZPuTnQ_Lushan-EV1050G2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Solar EVA Film (High Transmittance)

EVA film for encapsulating solar modules Lushan EV1050G1 is mainly used for PV module encapsulation. It's based on an ethylene vinyl acetate (EVA) copolymer and supplemented by special Chemical Accessories.

EVA film for encapsulating solar modules Lushan series could effectively protect to the PV cell, and has excellence performance of transmittance and aging-resistant. It provides structural support, electrical isolation, physical isolation/protection, and thermal conduction for solar circuits, as well as to maximize the service life of solar module.

Solar EVA Film Characteristic:

High volume resistivity and lasting adhesion strength holding capacity, and insure PV modules have long service life.

Low yellowness index change and low light transmittance attenuation, insure the high service efficiency of PV modules.

Excellent compatibility with flux welding ribbon, location tape, backsheet and silica gel.

Solar EVA film quality stability ensured by the complete and scientific quality management system.

With Strong R&D ability, Lushan has developed series solar EVA film new technolgies based on the fast cure solar EVA film Lushan EV1050G1, such as:

solar EVA film with high transmittance technology

solar EVA film with reinforced friendly technolgy

solar EVA film with low temperature fast cure technology

General Information
Additive	Unspecified additive
Features	Copolymer
Uses	Solar panel
Forms	Films

Physical	Nominal Value	Unit	Test Method
Density	0.950	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)	17 - 27	g/10 min	ASTM D1238
Molding Shrinkage			Internal method
Flow : 120°C	0.0	%	Internal method
Lateral flow : 120°C	0.0	%	Internal method
Water Absorption (Equilibrium, 23°C, 50% RH)	< 0.10	%	ISO 62
Gel Content	> 80	%	Internal method

Optical	Nominal Value	Unit	Test Method
UV Cutoff - Wavelength	300	nm	Internal method

Additional Information	Nominal Value	Unit	Test Method
Adhesion Strength			ASTM D903
to backsheet	> 8.0	kN/m	ASTM D903
to glass	> 10.0	kN/m	ASTM D903

Films	Nominal Value	Unit	Test Method
Tensile Modulus	5.00	MPa	ISO 527-3
Tensile Strength	15.0	MPa	ISO 527-3
Tensile Elongation (Break)	> 500	%	ISO 527-3

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	65.0 - 75.0	°C	ASTM D148

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+14	ohms·cm	ASTM D150

Optical	Nominal Value	Unit	Test Method
Refractive Index	1.490		ISO 489
Transmittance	> 91.0	%	ASTM D1003

Additional Information	Nominal Value	Unit	Test Method
Surface (Uncured): One Side Embossed

Resin Grade	Manufacturer	Category	Trademark
Mirathane™ H240	Miracll Chemicals Co., Ltd.	TPU, Unspecified	Mirathane™
TECHNOGRAN® PEHDI SUV	Eurocompound Polymers	HDPE	TECHNOGRAN®
Colorite 66 Series 6066	Colorite Polymers	PVC, Unspecified	Colorite 66 Series
Karina BLUE COLOR CONCENTRATE 06/183-RG-GE (CS)	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
OP - PC - Unfilled 1518-FDA	Oxford Polymers	PC	OP - PC - Unfilled