Order Products : sales@su-jiao.com

ISPLEN® PB 170 G2M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZOBnMK_ISPLEN-PB-170-G2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PB 170 G2M is a medium-high fluidity heterophasic copolymer characterised by its good balance of properties. Its molecular structure determines low viscosity and very good flow that permits to fill complex or large moulds with long flow paths obtaining short cycle times and an excellent balance of impact strength and high stiffness to allow the manufacturing of thin-walled articles with good mechanical resistance. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 170 G2M offer a multi-purpose grade intended for use in applications in which high mechanical properties are appreciated in addition with good processability: Domestic and leisure furniture. Square boxes and round storage containers for consumer appliances. Lids, caps and closures. Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PB 170 G2M is a medium-high fluidity heterophasic copolymer characterised by its good balance of properties. Its molecular structure determines low viscosity and very good flow that permits to fill complex or large moulds with long flow paths obtaining short cycle times and an excellent balance of impact strength and high stiffness to allow the manufacturing of thin-walled articles with good mechanical resistance.

TYPICAL APPLICATIONS
The particular characteristics of ISPLEN® PB 170 G2M offer a multi-purpose grade intended for use in applications in which high mechanical properties are appreciated in addition with good processability:

Domestic and leisure furniture.

Square boxes and round storage containers for consumer appliances.

Lids, caps and closures.

Industrial components: toys, sports, leisure, automotive, storage organizers, packaging...

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Features	Fast Molding Cycle Food Contact Acceptable Good Impact Resistance Good Processability High Stiffness Low Viscosity Medium Flow
Uses	Appliance Components Automotive Applications Caps Closures Containers Furniture Industrial Applications Lids Packaging Sporting Goods Thin-walled Parts Toys
Agency Ratings	EU Food Contact, Unspecified Rating

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	12	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	62		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1200	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	8.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	85.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
SEMICOSIL® 927 F	Wacker Chemie AG	Silicone	SEMICOSIL®
TEKNIFLEX® PXA 1280	Tekni-Films, a div of Tekni-Plex	Film, Copolyester/PCTFE	TEKNIFLEX®
Polene LDPE JJ 4324	TPI Polene Public Company Limited	LDPE	Polene LDPE
Sylvin 9302-70 WHITE 1264	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 9077-85 White 1324	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin