Order Products : sales@su-jiao.com
CERTENE™ LLBI-2024
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZNBvSu_CERTENE-LLBI-2024.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLBI-2024 is a certified prime grade containing Butene-ethylene copolymer, designed for INJECTION MOLDING applications requiring good balance of low warpage, low temperature resistance, and good mechanical properties. LLBI-2024 features easy processability over a wide range of molding conditions, good flexibility, and high surface appearance of molded articles. LLBI-2024 applications include housewares, lids, closures, caps, medical parts, and toys, where excellent toughness, high impact strength and high gloss are required. Recommended processing temperature is 180 to 220°C., with mold at 20 to 40°C.. LLBI-2024 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, F50) | 19.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 12.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 500 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4 | 448 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 71.5 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -90.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Notched bent strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMVO | Arkema | Nylon 11 | Rilsan® |
| RTP 1487 | RTP Company | PESU | RTP |
| Novamid® 2030CA FC | DSM Engineering Plastics | Nylon 66/6 | Novamid® |
| Huafon JF-W-DP4030 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Iupilon® MB2212R | Mitsubishi Engineering-Plastics Corp | PC+ABS | Iupilon® |
