Category: | LDPE , Low Density Polyethylene |
Manufacturer: | Celanese EVA Performance Polymers |
Trademark: | AT |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | ZKaIQM_AT-472.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
This multi-purpose resin provides superior performance in low speed, low neck-in extrusion coating applications. |
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.917 | g/cm³ | ASTM D1505 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.6 | g/10 min | ASTM D1238 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness | ASTM D2240 | ||
Shore A | 94 | ||
Shore D | 50 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 1(Break) | 11.0 | MPa | ASTM D638 |
Tensile Elongation 2(Break) | 550 | % | ASTM D638 |
Flexural Modulus - 1% Secant | 230 | MPa | ASTM D790 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Vicat Softening Temperature | 86.0 | °C | ASTM D1525 |
Extrusion | Nominal Value | Unit | |
---|---|---|---|
Melt Temperature | 290 to 330 | °C | |
Maximum Line Speed | 3.6 | m/sec | |
Minimum Coating Thickness 3 | 10 | µm |
Note Message | |
---|---|
1 . | Type IV, 50 mm/min |
2 . | Type IV, 50 mm/min |
3 . | 6 lb/ream |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RheTech Polypropylene CC20P100-01 | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
SIBUR Synthetic Rubber NBR 3335 | SIBUR, LLC | NBR | SIBUR Synthetic Rubber |
UNITIKA Nylon 6 A3030N-2 | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
Caltex PP HLG41S | GS Caltex | PP, Unspecified | Caltex PP |
Hostacom TKC 285N | LyondellBasell Industries | PP Copolymer | Hostacom |