Epoxies, Ect. 60-7170

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Epoxies, Etc.
Trademark:	Epoxies, Ect.
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZKBdBx_Epoxies-Ect-60-7170.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7170 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to "dark cure." Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. This is advantageous when potting or joining substrates with shadow areas. UV Cure 60-7170 may also be heat cured as a secondary cure operation. UV Cure 60-7170 is not affected by oxygen and will not have a sticky or greasy surface. The surface is rigid, smooth, and glossy when properly cured. UV Cure 7170 bonds to metal, plastic, paper and ceramic. UV Cure 60-7155 is a lower viscosity version of UV Cure 60-7170. Features: One component Excellent adhesion Contains no solvents Good electrical insulation Low shrinkage No out gassing Will shadow cure Good weathering resistance Cure is not inhibited by oxygen Low odor

Message

UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7170 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant.

UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to "dark cure." Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. This is advantageous when potting or joining substrates with shadow areas. UV Cure 60-7170 may also be heat cured as a secondary cure operation.

UV Cure 60-7170 is not affected by oxygen and will not have a sticky or greasy surface. The surface is rigid, smooth, and glossy when properly cured. UV Cure 7170 bonds to metal, plastic, paper and ceramic.

UV Cure 60-7155 is a lower viscosity version of UV Cure 60-7170.

Features:

One component

Excellent adhesion

Contains no solvents

Good electrical insulation

Low shrinkage

No out gassing

Will shadow cure

Good weathering resistance

Cure is not inhibited by oxygen

Low odor

General Information
Features	Bondability Electrically Insulating Good Adhesion Good Chemical Resistance Good Weather Resistance High Clarity Low Shrinkage Low to No Odor Low to No Water Absorption
Uses	Adhesives Coating Applications
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Additional Information	Nominal Value	Unit
Operating Temperature	-50.0 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Solids Content	100	%
Density (25°C)	1.09	g/cm³
Viscosity (25°C)	4.5	Pa·s
Shelf Life (40°C)	> 1	month

Cured Properties	Nominal Value	Unit
Tensile Strength	42.7	MPa
Electric Strength	17	kV/mm

Resin Grade	Manufacturer	Category	Trademark
Arak LLDPE HD5813EA	Shazand (Arak) Petrochemical Corporation	HDPE	Arak LLDPE
En Chuan 6000WAL	En Chuan Chemical Industries Co,. Ltd.	Polyester, TS	En Chuan
Envirez® LF 60380	Ashland Performance Materials	Polyester, TS	Envirez®
HiFill® PVDF CF10 BK	Techmer Engineered Solutions	PVDF	HiFill®
Durethan® BKV 50 H3.0 000000	LANXESS GmbH	Nylon 6	Durethan®