China PPS hGR40 DL/hGR41 DL Datasheet,PPS,Sichuan Deyang Chemical Co., Ltd-SHANGHAI SUSHENG

China PPS hGR40 DL/hGR41 DL

Wechat: WECHAT

Message
Low Chlorine type of 40% GF reinforced PPS compounds. PPS-hGR40 DL(natural color) and PPS-hGR41 DL (black) is 40% glass fiber reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low mold shrinkage, easy processing good dimensional stability, and radiation resistance. It is specially used in E/E industry which requires the chlorine content. Owing to its high performance, it is widely used in space aviation, chemical, electronic/electric, mechanical industry, automobile, railway fields etc. It can be used to make elements where high temperature resistance, electrical insulation are all important in aviation; anticorrosion valves and electrical insulating parts; precise plugs, outer shells and high temperature resistant contactors; electric parts, terminal and switch; carburetor, distributor, igniter, slide block, gears, thermocouple, piston rings with requirement of high temperature resistance and precision dimension; hot-air tube, crisping iron, hair curler, coffeepot.

Message

Low Chlorine type of 40% GF reinforced PPS compounds. PPS-hGR40 DL(natural color) and PPS-hGR41 DL (black) is 40% glass fiber reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low mold shrinkage, easy processing good dimensional stability, and radiation resistance.

It is specially used in E/E industry which requires the chlorine content. Owing to its high performance, it is widely used in space aviation, chemical, electronic/electric, mechanical industry, automobile, railway fields etc. It can be used to make elements where high temperature resistance, electrical insulation are all important in aviation; anticorrosion valves and electrical insulating parts; precise plugs, outer shells and high temperature resistant contactors; electric parts, terminal and switch; carburetor, distributor, igniter, slide block, gears, thermocouple, piston rings with requirement of high temperature resistance and precision dimension; hot-air tube, crisping iron, hair curler, coffeepot.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 40% filler by weight
Features	Chlorine Free Good dimensional stability Low friction coefficient Insulation Anti-arc Anti-gamma radiation Workability, good Good creep resistance Good chemical resistance Heat resistance, high Low shrinkage Flame retardancy
Uses	Large household appliances and small household appliances Electrical/Electronic Applications Electrical components Aircraft applications Industrial application Application in Automobile Field
Appearance	Black Natural color
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.70	g/cm³	Internal method
Molding Shrinkage			Internal method
Flow	0.25	%	Internal method
Transverse flow	0.75	%	Internal method
Chlorine Content		ppm	Internal method

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	111		Internal method

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	180	MPa	Internal method
Tensile Elongation (Break)	1.8	%	Internal method
Flexural Modulus	13600	MPa	Internal method
Flexural Strength	272	MPa	Internal method
Compressive Strength	12.7	MPa	Internal method

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	14	kJ/m²	Internal method

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	265	°C	Internal method
Melting Temperature	282	°C	Internal method

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	5.0E+14	ohms	Internal method
Volume Resistivity	5.0E+14	ohms·cm	Internal method
Dielectric Strength	17	kV/mm	Internal method
Dielectric Constant (1 MHz)	4.00		Internal method

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		Internal method

Injection	Nominal Value	Unit
Drying Temperature	110 - 140	°C
Drying Time	3.0 - 5.0	hr
Rear Temperature	270 - 290	°C
Middle Temperature	300 - 320	°C
Front Temperature	300 - 320	°C
Nozzle Temperature	290 - 320	°C
Processing (Melt) Temp	160 - 180	°C
Mold Temperature	100 - 150	°C
Injection Pressure	50.0 - 100	MPa
Injection Rate	Moderate
Back Pressure	0.100 - 1.00	MPa
Screw Speed	40 - 100	rpm

Injection instructions
Processing time: 4 to 16 hrMetal inserts should be preheated: Temperature: 130 to 140°C, Time: 1 hr (constant temperature)

Resin Grade	Manufacturer	Category	Trademark
POLYMAN® (ABS) M/TK-H	A. Schulman Europe	ABS	POLYMAN®
SUMIKASUPER® LCP E6810LHF	Sumitomo Chemical Co., Ltd.	LCP	SUMIKASUPER® LCP
Hapweld™ 38	Hapco Inc.	TP, Unspecified	Hapweld™
Karina IVORY PVC COMPOUND -E 832-35/ 1-Y-ERA-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Plaslube® J-50/10/TF/15	Techmer Engineered Solutions	PC	Plaslube®

Resin Grade

Manufacturer

Category:	PPS , Polyphenylene Sulfide
Manufacturer:	Sichuan Deyang Chemical Co., Ltd
Trademark:	China PPS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZGLZEG_China-PPS-hGR40-DL-hGR41-DL.pdf
PRICE:	Order Products email sales@su-jiao.com