Order Products : sales@su-jiao.com
Generic SAS
| Category: | SAS , Styrene Acrylonitrile Silicone Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZERGhM_Generic-SAS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic SAS This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.06 - 1.07 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (220°C/2.16 kg) | 19.7 - 20.6 | cm³/10min | ISO 1133 |
| Molding Shrinkage (23°C) | 0.50 - 0.70 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 51 - 108 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 750 - 2450 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 39.8 - 45.2 | MPa | ISO 527-2 |
| Flexural Modulus (23°C) | 850 - 2560 | MPa | ISO 178 |
| Flexural Stress (23°C) | 23.0 - 75.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 15 - 35 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 80.0 - 81.1 | °C | ISO 75-2/A |
| CLTE - Flow | 7.0E-5 - 9.1E-5 | cm/cm/°C | ISO 11359-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 | °C | |
| Middle Temperature | 220 - 221 | °C | |
| Front Temperature | 235 | °C | |
| Nozzle Temperature | 215 | °C | |
| Processing (Melt) Temp | 240 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic SASThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide AST43 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| AIE PA66 60G5F | Asia International Enterprise (Hong Kong) Limited | Nylon 66 | AIE PA66 |
| Lifoflex® UV 80 GC 1080 | ELASTO | SEBS | Lifoflex® |
| LUVOCOM® 1105-8382 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| LUVOCOM® 1105-8738/VI | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
