Order Products : sales@su-jiao.com
EMPILON® HT45
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | EMPILON |
| Trademark: | EMPILON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZDgqVM_EMPILON-HT45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMPILON® HT series compound has excellent Tensile Strength property, good resilience, low specific gravity, good electrical and mechanical properties. The EMPILON® HT series can be applied in many fields of use, such as: power tool grips, automotive parts, sporting goods etc. Hydrogenated Styrenic Block Copolymer is the main content of this HT series compound, its hardness range is from Shore A 28 to 95. They can be processed by ordinary plastic machinery for Injection, extrusion or calendaring etc. EMPILON® HT-series compound are non-toxic and free of Pb, Cd, Hg, Cr6+, Sb, As, Ba, Se, halogen and DOP plasticizer, they also comply with the Restriction of the use of certain Hazardous Substance directive in electrical and electronic equipment (RoHS 2002/95/EC) and SONY SS-00259 4th that prohibit products that contain Pb, Cd, Hg, Cr6+, PBB and PBDE etc. They are 100% recyclable and comply with the Waste Electrical and Electronic Equipment directive (WEEE 2002/95/EC). EMPILON® HTseries compound retain good mechanical properties after solvent resistance testing and won't hydrolyze in water. It is not necessary to dehumidity the material before use. HT series is of semi-opaque type in nature. For coloring, please select color master batch based on of PE or EVA material with the exception of PVC. Higher screw speed and backpressure are needed for better colorant dispersion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 21 | g/10 min | ASTM D1238 |
| Molding Shrinkage 1 | |||
| Flow | 0.80 | % | |
| Transverse flow | 1.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 44 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.67 | MPa | ASTM D412 |
| Tensile Strength | 7.06 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 670 | % | ASTM D412 |
| Compression Set (23°C, 70 hr) | 23 | % | ASTM D395 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (125°C, 168 hr) | 2.0 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (125°C, 168 hr) | -5.0 | % | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 125°C, 168 hr) | -1.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 175 - 185 | °C | |
| Middle Temperature | 185 - 195 | °C | |
| Front Temperature | 190 - 205 | °C | |
| Nozzle Temperature | 190 - 210 | °C | |
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 40.0 - 50.0 | °C | |
| Injection Pressure | 3.43 - 4.90 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.490 - 0.981 | MPa | |
| Screw Speed | Medium |
| Injection instructions |
|---|
| Hold Time: 5 sec.Cycle Time: 15~20 sec. |
| Note Message | |
|---|---|
| 1 . | Reference Only |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAYPRENE® RP223-60 | R&P (Pte.) Ltd. | TPE | RAYPRENE® |
| Teflon® FEP 106 | DuPont Fluoropolymers | FEP | Teflon® FEP |
| Xuchuan XCW-8425DH | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Dynacom 701-G40 | Dynachem Co. Ltd. | PP Copolymer | Dynacom |
| LUVOCOM® TPU-7682 | Lehmann & Voss & Co. | PUR, Unspecified | LUVOCOM® |
