Order Products : sales@su-jiao.com
Rilsan® AZM 23 T6LD
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Arkema |
| Trademark: | Rilsan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZDW7d3_Rilsan-AZM-23-T6LD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Rilsan® AZM 23 T6LD is a Polyamide 12 (Nylon 12) product filled with filler. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1170 | 1170 | kg/m³ | ISO 1183 1 |
| Melt volume-flow rate (235°C/2.16 kg) | 3.00 | -- | cm³/10min | ISO 1133 2 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 4800 | 4300 | MPa | ISO 527-2 3 |
| Tensile Stress (Break) | 85.0 | 82.0 | MPa | ISO 527-2 4 |
| Tensile Strain (Break) | 6.0 | 6.0 | % | ISO 527-2 5 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 6 | |||
| -30°C | -- | 8.00 | kJ/m² | |
| 23°C | -- | 14.0 | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 7 | |||
| -30°C | -- | 64.0 | kJ/m² | |
| 23°C | -- | 68.0 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 8 | |||
| 0.45 MPa | 173 | -- | °C | |
| 1.8 MPa | 165 | -- | °C | |
| Vicat Softening Temperature (50°C/h, B (50N)) | 165 | -- | °C | ISO 306 9 |
| Melting Temperature 10 | 178 | -- | °C | ISO 11357-3 11 |
| CLTE - Flow | 6.0E-5 | -- | cm/cm/°C | ISO 11359-2 12 |
| Electrical | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Relative Permittivity | IEC 60250 13 | |||
| 100 Hz | 5.00 | -- | ||
| 1 MHz | 5.00 | -- | ||
| Dissipation Factor | IEC 60250 14 | |||
| 100 Hz | 0.12 | -- | ||
| 1 MHz | 0.036 | -- |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | 10 °C/min |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 14 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 3840 | Formosa Plastics Corporation | HDPE | TAISOX |
| ATTANE™ 4607G | The Dow Chemical Company | ULDPE | ATTANE™ |
| FERREX® GPP30CC38UL GRAY | Ferro Corporation | PP Homopolymer | FERREX® |
| DURANEX® 756HA | Polyplastics Co., Ltd. | PBT+PET | DURANEX® |
| Generic PPS, Branched - Carbon Fiber | Generic | PPS, Branched | Generic |
