Order Products : sales@su-jiao.com

RESINOL® EPF 87120

Category:	Phenolic , Phenolic
Manufacturer:	RASCHIG GmbH
Trademark:	RESINOL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZD2GOI_RESINOL-EPF-87120.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Glass-fibre reinforced phenolic moulding compound

Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and very good mechanical properties

Primary application(s): Parts for the automobile and engineering industries having high demands on dimensional stability

This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)

General Information
Filler / Reinforcement	Glass Fiber
Features	Good Chemical Resistance High Heat Resistance Low Shrinkage
Uses	Automotive Applications
Agency Ratings	EU 2002/96/EC (WEEE) EU 2006/122/EC
RoHS Compliance	RoHS Compliant
Appearance	Black
Forms	Granules
Processing Method	Compression Molding Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.85 to 1.95	g/cm³	ISO 1183
Apparent Density	0.60 to 0.80	g/cm³	ISO 60
Molding Shrinkage - Flow ¹	0.30 to 0.50	%	ISO 2577
Water Absorption (23°C, 24 hr)	< 0.10	%	ISO 62
Post Shrinkage ²	< 0.050	%	ISO 2577

Thermal	Nominal Value	Unit	Test Method
Maximum Service Temperature			IEC 60216
<50 h	230	°C
20,000 h	150	°C

Additional Information	Nominal Value	Unit
Compression Molding Molding Pressure	> 20.0	MPa
Compression Molding Temperature	165 to 180	°C

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-2
Compression Molded	14000 to 18000	MPa
Injection Molded	16000 to 20000	MPa
Tensile Stress			ISO 527-2
Compression Molded	80.0 to 100	MPa
Injection Molded	120 to 140	MPa
Flexural Modulus			ISO 178
Compression Molded	16000 to 18000	MPa
Injection Molded	18000 to 22000	MPa
Flexural Stress			ISO 178
Compression Molded	150 to 180	MPa
Injection Molded	220 to 240	MPa
Compressive Stress	280 to 330	MPa	ISO 604

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
Compression Molded	4.0 to 6.0	kJ/m²
Injection Molded	5.0 to 7.0	kJ/m²
Charpy Unnotched Impact Strength			ISO 179/1eU
Compression Molded	8.0 to 10	kJ/m²
Injection Molded	12 to 14	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
1.8 MPa, Unannealed	> 200	°C	ISO 75-2/A
8.0 MPa, Unannealed	160 to 180	°C	ISO 75-2/C
CLTE - Flow (50 to 150°C)	1.5E-5 to 2.0E-5	cm/cm/°C	ISO 11359-2
Thermal Conductivity	0.40 to 0.60	W/m/K	ASTM E1461

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+10 to 1.0E+11	ohms	IEC 60093
Volume Resistivity	1.0E+12 to 1.0E+13	ohms·cm	IEC 60093
Electric Strength	20 to 30	kV/mm	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	8.00 6.00
1 MHz	6.00 4.00
Dissipation Factor			IEC 60250
100 Hz	0.10 to 0.20
1 MHz	0.020 to 0.030
Arc Resistance	PLC 4		ASTM D495
Comparative Tracking Index	> 175	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm, Tested by RASCHIG)	V-0		UL 94
Glow Wire Flammability Index	960	°C	IEC 60695-2-12
Glow Wire Ignition Temperature	960	°C	IEC 60695-2-13

Injection	Nominal Value	Unit
Middle Temperature	60.0 to 80.0	°C
Front Temperature	80.0 to 100	°C
Processing (Melt) Temp	100 to 115	°C
Mold Temperature	160 to 180	°C
Back Pressure	0.500 to 1.50	MPa
Screw Speed	70 to 100	rpm

Note Message
1 .	Compression Molded
2 .	168 h / 110°C

Resin Grade	Manufacturer	Category	Trademark
QR Resin QR-1000F-GFR20	QTR, Inc.	PC	QR Resin
FHR Polypropylene P9H9Z-018	Flint Hills Resources, LP	PP, Unspecified	FHR Polypropylene
MAJORIS FFR091 - 1298	AD majoris	PP Copolymer	MAJORIS
Sylvin 9067-80 Grey 9469	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Styropek® P 240AH	Styropek S.A. de C.V.	PS (EPS)	Styropek®