Order Products : sales@su-jiao.com

KRATON® D1191 E

Category:	SBC , Styrene Butadiene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Z9U8o5_KRATON-D1191-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton D1191 E is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied from Europe in the physical forms described below. Kraton D1191 ES - supplied as porous pellets dusted with amorphous silica Kraton D1191 ET - supplied as porous pellets dusted with talc Kraton D1191 ESM - supplied as powder dusted with amorphous silica Kraton D1191 EIM - supplied as powder dusted with calcium carbonate for supply to the North American market Kraton D1191 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Message

Kraton D1191 E is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied from Europe in the physical forms described below.

Kraton D1191 ES - supplied as porous pellets dusted with amorphous silica

Kraton D1191 ET - supplied as porous pellets dusted with talc

Kraton D1191 ESM - supplied as powder dusted with amorphous silica

Kraton D1191 EIM - supplied as powder dusted with calcium carbonate for supply to the North American market

Kraton D1191 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

General Information
Additive	Antioxidant
Features	Antioxidant Block Copolymer
Uses	Adhesives Asphalt Modification Coating Applications Plastics Modification Sealants
Appearance	Clear/Transparent
Forms	Pellets Powder

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ISO 2781
Apparent Density	0.40	g/cm³	ASTM D1895B
Antioxidant Additive	> 0.12	%	Internal Method
Ash Content
EIM	4.0 to 6.0	%	Internal Method
ES, ET	0.15 to 0.40	%	ISO 247
ESM	2.5 to 5.0	%	ISO 247
Extractables	< 1.4	%	Internal Method
Polystyrene Content	33 to 35	%	Internal Method
Solution Viscosity (25°C) ¹	1.1	Pa·s	Internal Method
Volatile Matter	< 0.30	%	Internal Method

Note Message
1 .	25% mass solution in toluene, Brookfield viscometer, LTF or LTV model

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene G10P100-01	RheTech, Inc.	PP, Unspecified	RheTech Polypropylene
Miramid® FP10S	BASF Leuna GmbH	Nylon 6	Miramid®
SUNFROST® KA75GA	Mitsubishi Chemical Performance Polymers, Inc.	PVC Elastomer	SUNFROST®
TOTAL Polyethylene Aceso® HDPE 5502 R3	TOTAL Refining & Chemicals	HDPE	TOTAL Polyethylene
MAJORIS GT407 - 8487	AD majoris	PP, Unspecified	MAJORIS