Order Products : sales@su-jiao.com
ALCUDIA® EBA PA-1240
| Category: | EBA , Ethylene Butyl Acrylate Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® EBA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z6Gr99_ALCUDIA-EBA-PA-1240.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EBA ALCUDIA® PA-1240 is a copolymer suitable for general extrusion, injection moulding and compounds where good processability, flexibility and very good mechanical properties are required. The butyl acrylate content is 12%. It contains antioxidant additives. TYPICAL APPLICATIONS
Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-1240 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.925 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ISO 1133 |
| n-Butyl Acrylate Content | 12.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A | 91 | ||
| Shore D | 38 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 14.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 700 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 73.0 | °C | ISO 306/A |
| Melting Temperature | 100 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2939-75 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| VESTAKEEP® 4000FP | Evonik Industries AG | PEEK | VESTAKEEP® |
| UNIPA® Ld | Nytef Plastics, Ltd. | Nylon 66 | UNIPA® |
| LNP™ LUBRICOMP™ HX00059 compound | SABIC Innovative Plastics Europe | Nylon 11 | LNP™ LUBRICOMP™ |
| MAXAMID™ PA66G43-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
