Order Products : sales@su-jiao.com
RABALON® MJ9301C
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | RABALON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z5MpZI_RABALON-MJ9301C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RABALON® MJ9301C is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of RABALON® MJ9301C: Food Contact Acceptable. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 83 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 4.00 | MPa | ISO 37 |
| Tensile Stress (Break) | 30.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 800 | % | ISO 37 |
| Tear Strength | 55 | kN/m | ISO 34-1 |
| Compression Set 1(70°C, 22 hr) | 50 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Ultra PBT 23 | ResMart | PBT | ResMart Ultra |
| Witcom PA6 6G-MTD | Witcom Engineering Plastics B.V. | Nylon 6 | Witcom PA6 |
| ADDINYL A2H V25 | ADDIPLAST | Nylon 66 | ADDINYL |
| Huafon JF-P-8985 / JF-I-5218 | Huafon Group Co., Ltd. | PUR-Ether | Huafon |
| Cereplast Compostables® 3000 | Trellis Bioplastics | PLA | Cereplast Compostables® |
