Order Products : sales@su-jiao.com
Quadrant EPP Proteus® O & P
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z4fc3A_Quadrant-EPP-Proteus-O-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Quadrant EPP Proteus® O & P is a Polypropylene Homopolymer (PP Homopolymer) product. It is available in North America. Typical application: Food Contact Applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | < 0.010 | % | |
| Saturation | < 0.010 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1310 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 33.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 14 | % | ASTM D638 |
| Flexural Modulus | 1340 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 33.1 | MPa | ASTM D790 |
| Compressive Modulus | 1380 | MPa | ASTM D695 |
| Compressive Strength (10% Strain, 23°C) | 34.5 | MPa | ASTM D695 |
| Coefficient of Friction (vs. Steel - Static) | 0.25 | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 64 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 98.9 | °C | ASTM D648 |
| Maximum Use Temperature - Long Term, Air | 82 | °C | |
| Peak Crystallization Temperature (DSC) | 164 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rigidex® HD5450UA | INEOS Olefins & Polymers Europe | HDPE Copolymer | Rigidex® |
| Terraloy™ MB-13000A | Teknor Apex Company | TPS+PP | Terraloy™ |
| ADMER™ AT2138E | Mitsui Chemicals Europe GmbH | PE, Unspecified | ADMER™ |
| Adiprene® LF 1900A | Chemtura | PUR-Ester/TDI | Adiprene® |
| Deltech PS Grade 130 | Deltech Polymers Corporation | PS (GPPS) | Deltech PS |
