Order Products : sales@su-jiao.com
RheTech Polyethylene E206-01
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | RheTech, Inc. |
| Trademark: | RheTech Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z34K8d_RheTech-Polyethylene-E206-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Linear Low Density Polyethylene, Black |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.927 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 10.3 | MPa | ASTM D638 |
| Flexural Modulus | 241 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 800 | J/m | ASTM D256 |
| Dart Drop Impact | 22.6 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 57.2 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 35.6 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 37.8 - 48.9 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 138 - 154 | °C | |
| Middle Temperature | 143 - 166 | °C | |
| Front Temperature | 154 - 171 | °C | |
| Nozzle Temperature | 149 - 160 | °C | |
| Mold Temperature | 15.6 - 26.7 | °C | |
| Injection Pressure | 2.76 - 9.65 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 2.07 - 8.27 | MPa | |
| Back Pressure | 0.345 - 0.689 | MPa |
| Injection instructions |
|---|
| Injection Speed: moderate to fastScrew RPM: slow to moderateCycle Time: application dependent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU XN-2004 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| THERMOLAST® K TF6FMA (Series: FC/AD1) | KRAIBURG TPE | TPE | THERMOLAST® K |
| ALCOM® PA66 910/32.1 TCE5 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| HIPOLEN P® MN 1TS | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
| MAJORIS DE321 | AD majoris | PP, Unspecified | MAJORIS |
