Order Products : sales@su-jiao.com
GETILAN GPE/150 LE-LS
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | GETILAN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z15TC9_GETILAN-GPE-150-LE-LS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GETILAN GPE/150 LE-LS is a crosslinkable polythene. GETILAN GPE/150 LE-LS is a medium density chemically crosslinkable polythene compound for low voltage power cable insulation and sheathing. The LS type is faster on crrosslink. It is a conveniently grafted polythene able to react in presence of moisture and of a catalyst. We normally suggest our catalyst type MAC/100 PSF. Where and when anti-ageing and anti-copper functions are required, we suggest our type MAC/100 SCU special catalyst. REACTION BETWEEN GRAFTING AND CATALYST These two compounds, separately stored, must be mixed before starting extrusion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Water Absorption - 24 hr (100°C) | 7.00 | g/m² | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 1 | IEC 60811 | ||
| 200°C | 30 | % | |
| Residual : 200°C | 0.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 15.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | 500 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | IEC 60811 | ||
| 127°C, 40 hr | 8.0 | % | |
| 135°C, 168 hr | 10 | % | |
| Change in Tensile Strain at Break in Air | IEC 60811 | ||
| 127°C, 40 hr | 4.0 | % | |
| 135°C, 168 hr | -15 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | BS 6622 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 210 | °C | |
| Cylinder Zone 5 Temp. | 230 | °C | |
| Die Temperature | 260 | °C |
| Note Message | |
|---|---|
| 1 . | 20 N/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sup-tech B801 | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon 6 | Sup-tech |
| TORZEN Marathon™ G3000XHL BK20 | INVISTA Engineering Polymers | Nylon 66 | TORZEN Marathon™ |
| Varcum 29341 | Durez Corporation | Phenolic | Varcum |
| Hifax TYC 007P E R299 | LyondellBasell Industries | PP Copolymer | Hifax |
| Kepital® FR-20H | KEP Americas | Acetal (POM) Copolymer | Kepital® |
