Order Products : sales@su-jiao.com
INVISION™ GX 5080G2N
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | INVISION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YxIAI8_INVISION-GX-5080G2N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPE Styrenic Rubber |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec, 23°C) | 80 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 6.50 | MPa | ISO 527-2/1A/500 |
| Tensile Strain (Break, 23°C) | 500 | % | ISO 527-2/1A/500 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1(23°C) | 43 | kN/m | ISO 34-1 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (200°C, 243 sec^-1) | 120 | Pa·s | ASTM D3835 |
| Note Message | |
|---|---|
| 1 . | Method Ba, Angle (Unnicked), 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil CV-2500-2 | NuSil Technology | Silicone | NuSil |
| CEPLA CW-460 | CEPLA Co., LTD | PP, Unspecified | CEPLA |
| DynaMix™ 3201-HF | Polymer Dynamix | PEEK | DynaMix™ |
| ICORENE® 7620 Fuel Lock | ICO Polymers EMEA, A Division of A. Schulman | Nylon 6 | ICORENE® |
| Hostacom X 4305 LS71 BLACK | LyondellBasell Industries | PP Copolymer | Hostacom |
