Order Products : sales@su-jiao.com

AFFINITY™ PT 1450G1P

Category:	POP , Polyolefin Plastomer
Manufacturer:	The Dow Chemical Company
Trademark:	AFFINITY™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YvVdId_AFFINITY-PT-1450G1P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Monolayer and coextrusion coating for packaging applications Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant) Coextruded with PRIMACOR™ polymer as a cost effective foil or PET sealant Complies with U.S. FDA Consult the regulations for complete details. (See notes) AFFINITY PT 1450G1P Polyolefin Plastomer is produced via INSITE™ echnology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to OPP and good taste and odor performance. Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

Message

Monolayer and coextrusion coating for packaging applications

Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant)

Coextruded with PRIMACOR™ polymer as a cost effective foil or PET sealant

Complies with U.S. FDA

Consult the regulations for complete details. (See notes)

AFFINITY PT 1450G1P Polyolefin Plastomer is produced via INSITE™ echnology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to OPP and good taste and odor performance.

Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

General Information
Agency Ratings	FDA Unspecified Rating
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.902	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.5	g/10 min	ASTM D1238

Resin Grade	Manufacturer	Category	Trademark
Maxxam™ TH-418.S001 6770	PolyOne Corporation	PP, Unspecified	Maxxam™
POLYMAN® (ABS) M/SHI	A. Schulman Europe	ABS	POLYMAN®
Prime Polypro™ E-185G	Prime Polymer Co., Ltd.	PP Impact Copolymer	Prime Polypro™
KRATON® D1102 A	Kraton Polymers LLC	SBS	KRATON®
PPR TPV08	Premier Plastic Resins, Inc.	TPV	PPR