Order Products : sales@su-jiao.com
RTP 2560.75 FR
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YvAtIO_RTP-2560-75-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.50 to 0.60 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.12 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2890 | MPa | ASTM D638 |
| Tensile Strength | 62.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 7.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 2620 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1100 | J/m | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+6 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+2 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 232 to 266 | °C | |
| Middle Temperature | 232 to 266 | °C | |
| Front Temperature | 232 to 266 | °C | |
| Mold Temperature | 52.0 to 93.0 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymer-E C4100 | Asia Polymer Corporation (APC) | LDPE | Polymer-E |
| ROPOTEN® T FV-15-204 | LUKOIL Bulgaria Ltd. | LDPE | ROPOTEN® T |
| CoREZYN® COR30-DA-210 | Interplastic Corporation | Polyester, TS | CoREZYN® |
| Grivory® GV-2 FWA nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| INSTRUC TPUGF10 60D | Infinity LTL Engineered Compounds | TPU, Unspecified | INSTRUC |
