Order Products : sales@su-jiao.com
Halene P M340
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Yu7GRF_Halene-P-M340.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
M340 is a Heterophasic Polypropylene Impact Copolymer (PPICP), produced by the latest generation Spheripol II Technology. This PPiCP is primarily suitable for Injection Molding & Compounding process. M340 combines excellent processability with high Flow, low Cycle Time, excellent Impact - Stiffness balance, Low Warpage and good Gloss. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 40 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1200 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 60 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 140 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 250 | °C | |
| Middle Temperature | 160 to 250 | °C | |
| Front Temperature | 160 to 250 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| StarTUFF TF 35-HR-9 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | StarTUFF |
| TORZEN Marathon™ FRU4800XHL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN Marathon™ |
| NuSil CF19-2615 | NuSil Technology | Silicone | NuSil |
| DESLON™ 6 DSC150D | DESCO Co., Ltd. | Nylon 6 | DESLON™ 6 |
| Hyundai EP PPF HT340 | HYUNDAI EP Co., Ltd. | PP Homopolymer | Hyundai EP PPF |
