Order Products : sales@su-jiao.com

KRATON® G1650 E

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YtGKzr_KRATON-G1650-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton G1650 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.2% mass. It is supplied from Europe in the physical forms identified below. Kraton G1650 EU - supplied as an undusted fluffy crumb Kraton G1650 ES - supplied as fluffy crumb dusted with amorphous silica Kraton G1650 E is used for formulating adhesives and coatings, as base material for compound formulations, as a modifier of thermoplastics and as a modifier of bitumen. The inherent stability of the mid block suggests the use of G1650 E in applications that must withstand weathering and high processing temperatures.

Message

Kraton G1650 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.2% mass. It is supplied from Europe in the physical forms identified below.

Kraton G1650 EU - supplied as an undusted fluffy crumb

Kraton G1650 ES - supplied as fluffy crumb dusted with amorphous silica

Kraton G1650 E is used for formulating adhesives and coatings, as base material for compound formulations, as a modifier of thermoplastics and as a modifier of bitumen. The inherent stability of the mid block suggests the use of G1650 E in applications that must withstand weathering and high processing temperatures.

General Information
Additive	Antioxidant (300 ppm)
Features	Antioxidant Copolymer Good Weather Resistance High Heat Resistance
Uses	Adhesives Coating Applications
Forms	Crumb

Physical	Nominal Value	Unit	Test Method
Density	0.908	g/cm³	ISO 2781
Antioxidant Additive ¹	> 0.0300	wt%	Internal Method
Ash Content	0.4 to 0.6	wt%	ISO 247-A
Polystyrene Content	28 to 31	%	Internal Method
Total Extractables	< 1.0	wt%	Internal Method
Viscosity - Toluene, 20.0 %w (25°C)	1.00 to 1.90	Pa·s	Internal Method
Volatile Matter	< 0.50	wt%	Internal Method

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	5.60	MPa	ISO 37
Tensile Stress (Yield)	35.0	MPa	ISO 37
Tensile Elongation (Break)	500	%	ISO 37

Note Message
1 .	Primary phenolic antioxidant

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC V946	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
MBA PP 2171	MBA Polymers	PP Copolymer	MBA PP
SOLARENE DH700	Dongbu Hannong Chemical	PS (GPPS)	SOLARENE
Kumho ABS 710G	Korea Kumho Petrochemical Co., Ltd.	ABS	Kumho ABS
Paxon™ AA60-003	ExxonMobil Chemical	HDPE, UHMW	Paxon™