Order Products : sales@su-jiao.com

KPOL-PP K-PPH 14.0

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YtAQlO_KPOL-PP-K-PPH-14-0.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Polypropylene Homopolymer

Applications

The KPOL® is a homopolymer used for general purpose injection moulding applications

It is suitable for production of complex articles with long flow paths and thin walls. Typical applications are closures and garden furniture.

Characteristics

The KPOL® is specially developed for producing rigid injection molded articles for general purpose applications. It gives consistent processability and high gloss at the products. It is a controlled rheology grade.

General Information
Additive	Antioxidant Antistatic Nucleating Agent
Features	Antioxidant Antistatic BPA Free Controlled Rheology Food Contact Acceptable Good Processability High Gloss Homopolymer Nucleated
Uses	Closures Furniture General Purpose Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.903	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	14	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	72		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	36.0	MPa	ASTM D638
Tensile Elongation ²(Break)	6.0	%	ASTM D638
Flexural Modulus - 1% Secant	1550	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	28	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	102	°C	ASTM D648
Vicat Softening Temperature	148	°C	ASTM D1525 ³

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min
3 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Quadrant EPP CESTILENE HD 500	Quadrant Engineering Plastic Products	HMWPE	Quadrant EPP
Stanyl® TS271A1	DSM Engineering Plastics	Nylon 46	Stanyl®
Vyncolit® 1914	Vyncolit N.V.	Epoxy	Vyncolit®
Geon™ Vinyl Fittings M1030	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Fittings
OmniLon™ PA6/6 GR23 FR All Colors	OMNI Plastics, LLC	Nylon 66	OmniLon™