Order Products : sales@su-jiao.com
Andur M-33 (HQEE)
| Category: | PUR-Ester/MDI , Polyurethane (Polyester, MDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ys0x5M_Andur-M-33-HQEE-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur M-33 is a low melting MDI-Ester prepolymer that, when processed with close attention to handling procedures and formulation, produces high quality elastomers. These elastomers perform very well in low temperature applications. |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 96 | ASTM D2240 | |
| Shaw D | 42 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Strength | ASTM D695 | ||
| 2% strain | 0.621 | MPa | ASTM D695 |
| 5% strain | 2.69 | MPa | ASTM D695 |
| 10% strain | 4.14 | MPa | ASTM D695 |
| 15% strain | 5.45 | MPa | ASTM D695 |
| 20% strain | 6.76 | MPa | ASTM D695 |
| 25% strain | 8.20 | MPa | ASTM D695 |
| 50% strain | 26.7 | MPa | ASTM D695 |
| Taber Abrasion Resistance | 29.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 12.2 | MPa | ASTM D412 |
| 300% strain | 14.8 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 18.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 510 | % | ASTM D412 |
| Compression Set | 21 | % | ASTM D395 |
| Bayshore Resilience | 45 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 6.0 - 8.0 | min | |
| Demold Time | 45 | min |
| Additional Information |
|---|
| Die C Tear, ASTM D1004: 695 pliAverage Split Tear, ASTM D1938: 170 pliStoichiometry Curative Level: 97%NBS Abrasion: 240% Rubber StandardParts of curative per 100 parts Andur M-33, 6.75% NCO: 15.15 parts by weightParts of curative per 100 parts Andur M-33, 6.8% NCO: 15.26 parts by weightParts of curative per 100 parts Andur M-33, 6.85% NCO: 15.38 parts by weightParts of curative per 100 parts Andur M-33, 6.9% NCO: 15.49 parts by weightParts of curative per 100 parts Andur M-33, 6.95% NCO: 15.6 parts by weightParts of curative per 100 parts Andur M-33, 7% NCO: 15.71 parts by weightMix Temperature: Andur M-33: 212°F Curative HQEE: 77-158°F Stability: Ambient Temperature, 25°C: 6 Months Melting Temperature, 60°C: 1 Month Processing Temperature, 90°C: 12 Hours Processing Temperature, 105°C: 3 Hours |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 110 - 140 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP CESTIFLAME PE-UHMW | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| Sevrene® 3582-80A | Vi-Chem Corporation | TPE | Sevrene® |
| GPPC PS-350S | GPPC Chemical Co., Ltd. | PS (HIPS) | GPPC |
| ENVIROPLAS® ENV48-NC570 | ENVIROPLAS®, Inc. | PSU | ENVIROPLAS® |
| Pearlthane® D11H95S | Lubrizol Advanced Materials, Inc. | TPU-Capro | Pearlthane® |
