Order Products : sales@su-jiao.com
Estane® R195A-9 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Yr964Q_Estane-R195A-9-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® R195A-9 is an aromatic, polyether-based thermoplastic polyurethane (TPU). Features: Excellent physical properties, low temperature performance and clarity with a wide processing window for extrusion. Uses: Blown and flat die/cast film extrusion. Injection and blow molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 34.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 13 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 11.0 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 31.0 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 64.0 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 440 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 119 | kN/m | ASTM D624 |
| Cracking | 30 | kN/m | ASTM D470 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Volume (23°C, 24 hr, in water) | 0.50 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -46.0 | °C | DSC |
| Melting Temperature | 176 | °C | DSC |
| Kofler Melting Temperature | 169 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 177 | °C | |
| Cylinder Zone 2 Temp. | 182 | °C | |
| Cylinder Zone 3 Temp. | 188 | °C | |
| Cylinder Zone 4 Temp. | 193 | °C | |
| Adapter Temperature | 199 | °C | |
| Melt Temperature | 196 | °C | |
| Die Temperature | 199 | °C |
| Extrusion instructions |
|---|
| Screen Pack Recommendation: 20/40/80Dew Point: -40°C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx TPP2B10 | The Matrixx Group, Inc. | PP Copolymer | Matrixx |
| RTP 1600 Z | RTP Company | PAS | RTP |
| Cellophane™ 360MS | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| HiFill® PA6 GF30 IM BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| HiFill® PP GF/M30 CC BK | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
