Order Products : sales@su-jiao.com

Tecnoflon® FOR 5351/U

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YqX7Av_Tecnoflon-FOR-5351-U.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 5351/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade has excellent flow and good compression set. Tecnoflon® FOR 5351/U can be used for molded items with complicated shapes which require a very good hot tear resistance for part removal. Some of the basic properties of Tecnoflon® FOR 5351/U are: Very fast cure rate Very good scorch safety Superior mold flow Excellent mold release Lack of mold fouling Low compression set High elongation Excellent hot tear strength TECNOFLON® FOR 5351/U can be used for injection and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 5351/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade has excellent flow and good compression set. Tecnoflon® FOR 5351/U can be used for molded items with complicated shapes which require a very good hot tear resistance for part removal.

Some of the basic properties of Tecnoflon® FOR 5351/U are:

Very fast cure rate

Very good scorch safety

Superior mold flow

Excellent mold release

Lack of mold fouling

Low compression set

High elongation

Excellent hot tear strength

TECNOFLON® FOR 5351/U can be used for injection and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Copolymer Fast Cure Good Flow Good Mold Release Good Tear Strength High Elongation Low Compression Set Low Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	24	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Rilsan® HT CESVO P223 TL	Arkema	PPA	Rilsan® HT
RTP 1400 TFE 15 SI 2	RTP Company	PESU	RTP
VITAMIDE® BX10BK6660	Jackdaw Polymers	Nylon 6	VITAMIDE®
Iupilon® GSH2020LR Y083	Mitsubishi Engineering-Plastics Corp	PC	Iupilon®
LEXAN™ 3414R resin	SABIC Innovative Plastics	PC	LEXAN™