Order Products : sales@su-jiao.com
Clariant Nylon 6/6 6601-FR
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Clariant Corporation |
| Trademark: | Clariant Nylon 6/6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YnB7Rf_Clariant-Nylon-6-6-6601-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Clariant Nylon 6/6 6601-FR is a Polyamide 66 (Nylon 66) material. It is available in North America for injection molding. Important attributes of Clariant Nylon 6/6 6601-FR are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.4 to 1.9 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 50.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Flexural Strength | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 196 | °C | |
| 1.8 MPa, Unannealed | 87.8 | °C | |
| Melting Temperature | 257 | °C | |
| RTI Elec (1.57 mm) | 65.0 | °C | UL 746 |
| RTI Imp (1.57 mm) | 65.0 | °C | UL 746 |
| RTI Str (1.57 mm) | 65.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.57 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 to 82.2 | °C | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 249 to 266 | °C | |
| Middle Temperature | 271 to 288 | °C | |
| Front Temperature | 282 to 293 | °C | |
| Nozzle Temperature | 266 to 288 | °C | |
| Mold Temperature | 54.4 to 93.3 | °C | |
| Injection Pressure | 34.5 to 103 | MPa | |
| Back Pressure | 0.00 to 5.52 | MPa | |
| Screw Speed | 30 to 90 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VENELENE® 7700M | Poliolefinas Internacionales, C.A. (Polinter) | HDPE | VENELENE® |
| UBESTA 3030 U | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| 4MID® 9A22330 | 4Plas | Nylon 66 | 4MID® |
| Forprene® 6SD001A75 | SO.F.TER. SPA | TPV | Forprene® |
| Braskem PP D7056.05 | Braskem Europe GmbH | PP Impact Copolymer | Braskem PP |
