Order Products : sales@su-jiao.com

Moplen EP549N

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	HMC Polymers
Trademark:	Moplen
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YmhI0C_Moplen-EP549N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Medium melt flow polypropylene impact copolymer resin

Features:

Good impact/stiffness balance

Good dimensional stability/Low warpage

Good processability/High flowability

Low stress whitening

Good UV stability

Good thermal resistance

Good sealing/Low fiber generatio

Applications:

Battery cases

Industrial containers

Motorcycle parts

General Information
Features	Fast Molding Cycle Good Dimensional Stability Good Impact Resistance Good Processability Good Stiffness Good Thermal Stability Good UV Resistance High Flow Impact Copolymer Low Warpage
Uses	Battery Cases Industrial Containers

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792B
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	12	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	26.0	MPa	ASTM D638
Tensile Elongation (Yield)	6.0	%	ASTM D638
Flexural Modulus	1350	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	100	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	100	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
S&E Wire & Cable GTPO8280 NATURAL	S&E Specialty Polymers, LLC	TPO (POE)	S&E Wire & Cable
SILVER® PET823G30	Guangdong Silver Age Sci & Tech. Co., Ltd	PET	SILVER®
Sindustris PP SH5301	Sincerity Australia Pty Ltd.	PP, Unspecified	Sindustris PP
Smooth-Sil® 935	Smooth-On, Inc	Silicone	Smooth-Sil®
ALTECH® PA66 A 2035/508 GF35	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66