Order Products : sales@su-jiao.com
SureSpec LD20-020C
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Yl87ib_SureSpec-LD20-020C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD20-020C is a certified prime resin designed for high clarity Blown films for packaging of articles requiring good opticals. LD20-020C features optimal balance of film strength, stiffness, good openability and excellent sealability as well as easy processability. Maximum recommended film drawdown is 1.0 mil. LD20-020C contains medium slip and medium antiblock. LD20-020C complies with FDA regulation 21CFR 177.1520 (c) 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 32 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : 32 µm | 234 | MPa | |
| 1% Secant, TD : 32 µm | 248 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 32 µm | 10.0 | MPa | |
| TD : Yield, 32 µm | 11.0 | MPa | |
| MD : Break, 32 µm | 26.0 | MPa | |
| TD : Break, 32 µm | 15.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 32 µm | 180 | % | |
| TD : Break, 32 µm | 550 | % | |
| Dart Drop Impact 1(25 µm) | 85 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 32 µm | 370 | g | |
| TD : 32 µm | 160 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 75 | ASTM D2457 | |
| Haze (25.0 µm, Blown Film) | 5.5 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW2422 | Teknor Apex Asia Pacific PTE. LTD. | LDPE | Sinpolene |
| AKROMID® B3 1 natural (2499) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| DENISAB 0513 | Vamp Tech | ABS | DENISAB |
| Durethan® BKV 130 CS DUS008 600091 | LANXESS GmbH | Nylon 6 | Durethan® |
| Iupilon® FPR4500 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
